S10 Lézer Gravírozás Gép 10W high-density Lézeres Gravírozó, Nagy sebességű Levegő Segíti Ipari minőségű Faragás Precíziós 410x400mm

Bejelentett tulajdonságok

Model:

S10

Diode Laser Output Power:

10W (Note This Is Light Energy Not Electrical Energy)

Inner Diameter Of Air Pipe:

7.5mm (Recommended To Use 30L/Min, 0.03mpa Air Compressor, Out Diameter Of Nozzle

Laser Wavelength:

455±5nm

Engraving Accuracy:

0.01mm

Engraving Area Size:

410x400mm

Focusing Method:

Fixed Focus + Sliding Device

Laser Protection Cover:

Equipped With a Detachable Laser Cover To Protect The Eyes. You Can Adjust It Up And Down, Or Remove The Cover

Notes:

●Because of the powerful laser of S10, it is forbidden to run the engraving machine unattended. Pause it if you're not around.:

●For detailed machine instructions, please refer to the manual for parameter settings.:

●When operating the laser engraving machine, please install the laser protective cover; if it is not installed, you need to wear goggles.:

●Do not touch the laser with your hands, otherwise you may burn your hands.:

●Please avoid strong impact on the machine.:

●It is forbidden for children under 14 years old to use this product, and children over 14 years old need adult attended.:

●Do not use the laser directly to any specular reflection object, which may cause injury to the operator or burn the laser.:

Packing List:

1 x X-Axis Assembly:

2 x X Profiles:

2 x Y Profiles:

1 x Control Box Assembly:

3 x Support Feet:

1 x S10 Laser:

1 x 12V 5A Power Adapter:

1 x Power Cord:

1 x USB Cable:

1 x Air Tube:

3 x Tool Bag:

1 x Laser Goggles:

1 x Test Wood Board:

1 x A4 Size Metal Pad:

Step 1-6 Install The Package:

1 x User Manual:

 :

  :